Slag Grinding & Gravity Concentration
Reclamation Plant (Complete)


Reference #:
23189
Manufacturer:
Various Manufacturers
Model:

Receiving hopper capacity:
15 tons
Working plant width:
48 feet
Working plant length:
140 feet
Head tank floor elevation:
32 feet
Thickener tank diameter:
40 feet
Flat conveyor width/capacity:
48" / 95lbs/ft
(4) concentrate tables cap/ea:
11,000 lbs each
Jaw crusher capacity:
47,000 lbs


This plant is still installed. It has been very well maintained and is in very good operating condition available for immediate inspection and delivery.

Used to recover metals from Nickel Based Alloy production, this plant will also recover metals from various other production types including Stainless Steel.

The following is a partial list of what comes with the plant:

1) Receiving Hopper – capacity 15 tons
2) Stationary grizzly
3) Apron feeder – 22,740 lbs dead load
• Drive – 630 lbs
• Material – full hopper loading
4) 48" w/conveyor – 95 lbs/lin ft
• Drive – torque arm and motor
• Material – up to 30 lbs/lin ft
5) 48" w/conveyor – 95 lbs/lin ft
• Drive – torque arm and motor
• Material – up to 30 lbs/lin ft
6) Vibrating grizzly – 5,800lbs
• Motor and base – 180 lbs
7) Jaw crusher – 47,000 lbs dead load
• Motor and base – 821 lbs
8) 5T chain block
9) Crusher Feed Chute
10) 48" w/conveyor – 95 lbs/lin ft
• Drive – torque arm and motor
• Material – up to 30 lbs/lin ft
11) Crusher & grizzly chute work
12) 18" w/conveyor – 55lbs/lin ft
• Drive - torque arm and motor
• Material up to ___lbs/lin ft
13) 15" w/conveyor – 55 lbs/lin ft
• Drive – torque arm and motor
• Material up to 10 lbs/lin ft
14) Mill storage bin – wt to suite design
15) Vibrating feeder – 1385 lbs
• Material – to suit design
16) 18" w/conveyor – 55lbs/lin ft
• Drive – torque arm and motor
• Material – up to 10lbs/lin ft
17) Belt scale – part of conveyor
18) Electro-magnet
19) Ball mill
• Drive, balls, material
20) Trommel screen
21) Mineral jig – 4,085lbs
• Slurry
22) Dewatering screw – 7,250lbs
• Slurry – 2,060lbs
23) Dewatering screw – 5,455lbs
• Slurry – 1,975lbs.
24) Regrind classifier – 6,200lbs
• Slurry – 7,200lbs.
25) Regarding mill, drive, rods, material – use existing drawings for information
26) Cyclones (3 final) – 150 lbs each
27) Pulp splitter – 475 lbs
• Slurry – 550 lbs
28) Concentrate tables (4) – 11,000 lbs each dead weight
29) Head tank – wt to suit design
• Water – 31,650 lbs
30) Jig tails pump box – wt to suit design
31) Cyclone feed pump box – wt to suit design
32) Pump for item 30 drive – 425 lbs
33) Pump for item 21 drive – 575 lbs
34) Slurry pumps drive – 425 lbs.
35) Conveyor – 35 lbs/lin ft
• Drive – torque arm and motor
• Material – up to 10 lbs/lin ft
36) 18" w/conveyor – 85 lbs/lin ft
• Drive – torque arm and motor
• Material – up to 10 lbs/lin ft
37) 10 " conveyor – 55 lbs/lin ft
• Drive – torque arm and motor
• Material – up to 10 lbs./lin ft
38) Concentrate storage – wt to suit design
39) 3-ton crane – 5,400 lbs
40) Thickener tank – 32,000 lbs
• Mechanical brake – 900,090 lbs
41) Drum filter – 34,000 lbs

This plant is complete in all respects including Electrical Equipment.

The plant is installed in its own building comprised of three floors as pictured.